Skip to content

COMMERCIAL CLEANING

Commercial Cleaning Quote Template: Scope, Visits, and Price

Try the free quote builder →

A commercial cleaning quote should specify which areas you’ll clean, what you’ll do in each area, how often you’ll visit, and who supplies consumables. Price the actual workload and calendar, separate optional work, and include access, payment, and acceptance terms so the customer and crew can work from the same scope.

“Office cleaning, three times a week” sounds clear until the first visit. Does it include the staff kitchen? Will the crew refill soap or supply it? Is carpet extraction included? A usable quote answers those questions before a manager approves the price or a crew turns up after hours.

This commercial cleaning quote template is for routine office and similar commercial sites. The prices and times below are fictional examples, not market rates or staffing standards. Sites with clinical, industrial, or other specialized needs require their own specifications.

What do you need from a site walkthrough?

Walk the service route with the person who knows how the building operates. Mark the rooms in scope, identify floor types and fixtures, and note which surfaces the crew can access. Separate the cleanable area from the building’s total footprint. Two offices with the same floor area can have different restroom counts, layouts, and waste routes.

Ask who can let the crew in, when staff leave, where equipment can be stored, and where waste is taken. Record how long entry, equipment setup, and lockup are likely to take. Confirm the process for alarm or key handoff, without putting credentials in a customer-facing quote.

If you still need a walkthrough or confirmation of restricted areas, give a provisional price with clear assumptions. Use the quote versus estimate guide to decide which document to send.

Build a scope by area, task, and frequency

Write a scope that a supervisor can check at the end of a visit. Start with a short table like the one below. The Maryland Judiciary’s janitorial procurement scope is a real example of specifying task frequencies and excluding certain rooms. Its contract terms are specific to that procurement; use the structure, not its requirements, for your quote.

Sample task schedule for a fictional small office
AreaEach scheduled visitWeekly or separate
Reception and hallRemove visible debris, clean the accessible floor, spot wipe entrance glassWipe accessible ledges weekly; exterior glass excluded
Workstations and meeting roomEmpty designated bins and vacuum accessible carpetDust clear horizontal surfaces weekly; no handling of papers or equipment
Two restroomsClean fixtures, mirrors and floors; refill from customer stockReport low stock to the site contact
Break roomClean sink, clear counters and floor; empty designated binsAppliance interiors excluded
Carpet extractionOutside routine scopeOptional service with separate written approval

Say which visit contains the weekly tasks. If that visit falls on a closure, specify whether those tasks move to another scheduled visit. “Weekly” gives the customer a frequency; it also needs to give the crew a day or a rule for choosing one.

Separate supplies, consumables, and optional work

Identify who provides tools and cleaning products, who buys paper products and liners, and who replenishes dispensers. A customer can supply soap while the crew refills it. Decide what the crew does if approved stock runs out, including who can authorize a purchase.

The Oregon State Police’s janitorial bid form separates a monthly service rate from exceptional work and reimbursable consumables. Your customer may prefer a different arrangement. Either way, keep the billing treatment visible so that two bids with the same headline price can be compared.

List periodic work separately when it has different labour or equipment needs. For example, quote an initial reset clean or carpet extraction as its own line, with the frequency, unit, and approval step. An optional service should not quietly become an obligation for the crew.

Estimate labour from the work and the calendar

Break the visit into task groups such as floors, fixtures, surfaces, and waste. Estimate time using measured areas, fixture counts, your equipment, and observations from comparable jobs. Add setup and closeout. If two people are on site for 90 minutes each, budget three labour hours even though the visit takes only 90 minutes on the calendar.

ISSA’s cleaning time guidance treats published task times as a bidding reference, not a site-specific time study. Check your assumptions against the site and your crew. An occupied office, long walk to the waste room, or restricted elevator can change the labour estimate without changing the square footage.

Work from the service calendar, not a four-week shortcut. Three visits every week for 52 weeks is 156 visits, averaging 13 per month. Multiplying by four weeks gives only 12 visits per month, or 144 per year. If you quote a fixed monthly amount, count the dates over the term, including holidays, makeup visits, and agreed closures.

Worked example: three office visits a week

Assume the parties agree to 156 visits over a 12-month term. Each visit averages three labour hours, including entry, setup, and lockup. The customer provides dispenser stock; the contractor supplies routine tools and cleaning products. The contractor uses a hypothetical CA$28 loaded labour cost per hour, which includes assumed employer costs. No figures represent typical rates.

Illustrative monthly costing sheet, before tax
Cost or priceCalculationMonthly amount
Labour13 average visits × 3 hours × CA$28CA$1,092
Cleaning products13 visits × CA$6CA$78
Travel and supervisionIllustrative allocationCA$160
Equipment and overheadIllustrative allocationCA$100
Total modeled costSum of four cost linesCA$1,430
Proposed priceCA$1,430 ÷ (1 − 0.20)CA$1,787.50

The last line targets a 20% spread between price and modeled cost as a share of price. Multiplying cost by 1.20 would give CA$1,716, a 20% markup on cost rather than the same share of price. Neither calculation sets your required margin. Use your own costs and check that you have not counted travel or supervision twice.

Test an assumption before sending. If each visit actually takes an extra 15 labour minutes, monthly labour rises by 13 × 0.25 × CA$28, or CA$91. Check whether the quote can absorb that difference or whether the scope, staffing, or price needs to change. Compare job duration and crew availability with the service scheduling guide.

Choose a billing unit the buyer can compare

For a fixed monthly price, state the service term and calendar behind the amount. The buyer should be able to tell whether a month with fewer service days still carries the same bill and what happens when the office closes unexpectedly. For per-visit billing, state what counts as a billable visit and how approved extra visits appear on the invoice.

Compare two bids on the same scope before comparing totals. If one includes three visits every week and another includes up to twelve per month, ask each contractor for the annual visit count. Then compare responsibility for supplies and whether periodic work is included. Ask for a written revision if the assumptions differ. An apparent saving may reflect fewer visits or work the customer will need to buy separately.

Copy this commercial cleaning quote template

  1. Customer and site: [Billing customer], [service address], [floor or suite], [site contact], [quote reference and expiry].
  2. Scope: [Areas included], [task table by visit and week], [excluded areas], [separate first clean or periodic work].
  3. Calendar and access: [Days], [arrival or access window], [term and planned visit count], [holiday or makeup rule], [who confirms entry].
  4. Responsibilities: [Contractor products and tools], [customer consumables], [who replenishes], [who approves extras and handles service concerns].
  5. Price and terms: [Currency and recurring monthly or per-visit amount], [included visits], [optional line items], [tax treatment], [payment terms and invoicing channel].
  6. Approval: [Authorized contact and acceptance method], [how a change is priced and approved], [what happens before the first visit].

In the fictional example, the price line would read: “Routine office cleaning, three scheduled visits per week, 156 planned visits over 12 months: CA$1,787.50 per month before applicable tax. Includes routine tools and cleaning products. Customer supplies dispenser stock. Initial reset cleaning and carpet extraction are outside the recurring price.” Use the calendar and scope table to support that line.

Check the quote before sending and hand it over after approval

  • Read it as the customer: can you tell what the price buys and who pays for consumables?
  • Read it as the crew: can you tell where to enter, which rooms to clean, and what happens on a closure?
  • Read it as the office: can you match the billing period, optional charges, and approved revisions to the job?

Use the quote follow-up guide to resolve questions without sending repeated generic reminders. Once accepted, carry the scope into a work order and use the service invoice checklist to verify later charges against the agreed work.

Start with the ServiceSense cleaning quote builder to enter your own descriptions and prices and download a PDF. Create an account to explore sharing a quote for customer approval. The starter provides example line descriptions; the site scope, workload, and price are yours to verify.

By ServiceSense. Published November 11, 2026. Product claims checked against the current Site source. The office scope, costing, and quote wording are fictional illustrations.

Frequently asked questions

What should a commercial cleaning quote include?

Identify the service address and cleanable areas, list tasks by frequency, state the service days and access window, assign supply responsibilities, and show the price and billing basis. Include exclusions, payment terms, quote validity, and a clear way to accept or request a revision.

Should I quote office cleaning by square foot or by visit?

Square footage is an input for estimating floor work. A per-visit or monthly price may be easier to explain once you know the workload. Check fixture counts, surfaces, access, waste handling, and task frequency before turning an area measurement into a firm offer.

Is three visits a week the same as twelve visits a month?

No. Twelve visits assumes four weeks. Three visits across each of 52 weeks gives 156 annual visits, or 13 per month on average. Actual dates and holiday exceptions can change the count, so use the agreed calendar for a fixed price.

Who pays for toilet paper, hand soap, and liners?

That depends on the agreement. Name the items the customer supplies, the items included in your price, and any items billed separately. Assign responsibility for replenishment and for reporting low stock; supplying an item and refilling its dispenser are separate duties.

Should a first deep clean be included in the monthly price?

Inspect the starting condition before deciding. If the first visit needs extra labour or equipment, show the initial clean as a separate line with its own scope and price, or state explicitly that the agreed startup work is included.

What happens when the customer adds a room or a service day?

Recalculate the workload and price, state when the new scope would start, and record the customer’s approval before changing the crew’s assignment. Keep the old and new scopes distinct so a later invoice can be traced to the work actually authorized.

Put your next quote together.

Your details, your prices, a professional PDF. Start free without signing in.

Create a free quote →